Company


November 16, 2016

How the Analysis Offset feature can be used to design WT Braces

In the RISA-3D when you model a WT brace it exists at the member centroid, which means that no bending ends up in the brace due to the fact that the brace is actually eccentric to the braced frame.
analysis-offset-01In Version 15.0 we added a feature called “Analysis Offset” which moves the centroid of the member for analysis. In the example below the flange of the WT is bolted to a gusset that is ¾” thick, so we would want the centroid to be moved to the face of the flange, plus half the gusset thickness (3/8”):

analysis-offset-02

With this offset applied, when the model is solved you’ll note that the brace bows out of plane, indicating that it does have bending.

analysis-offset-03

The detail report confirms this. Note how much the Code Check value increases when the real-life bending due to eccentricity is considered in the RISA model.

analysis-offset-04


Tags:

This entry was posted by RISA News on Wednesday, November 16th, 2016 at 8:00 am and is filed under Technical Solutions. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.