December 5, 2019

Using Redesign Lists in RISA-3D

RISA-3D includes Redesign Lists that are used to optimize hot-rolled steel, cold-formed steel, dimensional lumber, and concrete beams and columns. Although, the criteria used for this optimization is the Design Rules, the sizes must be chosen from the available sizes in the Redesign List. It is now possible to add, modify and update the Redesign lists for various material directly in RISA-3D.

To access the redesign lists from within RISA-3D click the Redesign Lists button on the Advanced tab.

Advanced Redesign Lists

Once the dialog opens, it is possible to create new redesign lists and modify or delete existing ones.

Modify an Existing Design List

To make modifications to a specific design list first choose a Database, Member Type, Shape Type and Design List.

Then choose which shapes to add or remove from the selected list and click OK to finish modifying the list.

Add Member Design List

Create a New Design List

To create a new Design List, first click New and then enter a List Name.

Then select shapes from the Available Shapes list to add to the Current Design List. Shapes can be selected and added one at a time or can be multi-selected by holding the Shift key. Once all the shapes have been added to the list, click OK.

Add Member Design List2

Note: The default design lists as well as any user created lists are located in the following folder:

C:\Users\*username*\Documents\RISA\Redesign Lists

Once the new list is created, it can be selected as the active Design List for a given Section Set from the Section Sets spreadsheet.

Add Member Design List5

Or by modifying the Section Set from the member Properties Panel.

Add Member Design List4

Tags: RISA-3D Redesign v18

You may also be interested in

Nov 8, 2018 | Tips & Tricks
Mat Slab Overturning and Sliding Safety Factors

RISAFoundation v11.0 includes two new tabs in the Safety Factors resul...
Read More

Aug 21, 2019 | Tips & Tricks
RISA-3D v18 Sneak Peek Videos

The new release of RISA-3D is right around the corner! Check out our t...
Read More

Jul 12, 2019 | Tips & Tricks
Implementing Realistic Behavior for T/C Members in RISA-3D

Tension or Compression (T/C) Only members are commonly used in steel b...
Read More

Jun 20, 2019 | Tips & Tricks
Understanding Wall Panel Forces with Rigid Diaphragms

Rigid diaphragms represent a plane of very high rigidity and distribut...
Read More