Shape Databases

For each material, there are several databases of common structural shapes such as Hot Rolled Steel Wide Flanges, Cold Formed Shapes, Wood, Concrete Tees, etc.  You may also choose from shapes created in RISASection.  You may type in the names directly, select shapes from these databases or add your own shapes.

What do you want to do?
What do you want to know?

Database Shape Types

There are different types of shapes for each material type including General shapes.  Names for each shape type follow a syntax so that they may be typed directly into the Shape field on the Primary tab of the s spreadsheet.  Alternately you may click the  button to look up a shape and select it. 

Hot Rolled Shapes

AISC, Canadian, Trade Arbed and custom Hot Rolled shapes are accessed by clicking the Edit Shape Database  button from the RISA Toolbar, and then clicking the Hot Rolled tab from within the Shape Database Editor dialog.  The hot rolled shapes and databases are more fully described in the Hot Rolled Steel Design section.  See Hot Rolled Steel Databases for more information.

Virtual Joists and Virtual Joist Girders

The Steel Joist Institute (SJI) has put together Virtual Joist and Virtual Joist Girder tables which convert common joist and joist girder sizes into equivalent wide flange beams. These shapes are available by selecting Virtual Joist Girder or Virtual Joist from the Database/Manufacturer menu. For additional advice on this topic, please see the RISA Tips & Tricks webpage at risa.com/post/support. Type in Search keywords: Virtual Joist Girders

Cold Formed Shapes

Manufacturer and custom cold formed shapes are accessed by clicking the Edit Shape Database  button from the RISA Toolbar, and then clicking the Cold Formed tab from within the Shape Database Editor dialog.  The cold formed shapes and database are more fully described in the Cold Formed Design section.  See Cold Formed Steel Databases for more information.

Concrete Shapes

Concrete shapes do not have a predefined database like hot rolled and cold formed steel.  Instead, they are defined using a parametric shape code that may be assigned any depth or width. There are two types of shapes currently supported: Rectangular and Round.  See Concrete Database for more information.

Wood Shapes

The available wood shapes are based on the dimension lumber and post and timber shapes given in the NDS or CSA O86, depending on what code you have chosen as your Wood design code.  You may also design for multiple plies of these shapes.  Note that the NDS dimension lumber shapes are all nominal sizes.  CSA O86 shapes are actual sizes.

Allowable stress values for each shape are based on the species and grade information given in the selected design code.  See Wood Database for more information.

General Shapes

Arbitrary Shapes

Arbitrary Shapes are a special, catch-all shape.  This arbitrary shape type is provided so that any shape can be added to the shape database. 

AISC code checks are not calculated for arbitrary shapes since their place in the specification is unknown.  Everything else will be calculated for them (forces, deflections, stresses).  The max thickness (Max thick) value for the cross section is used to determine the pure torsional shear stress for the shape. "J" is the torsional constant. The "d" values (the distances to the extreme fibers) allow the program to calculate stresses at the extreme fibers.

Note: 

To Add an Arbitrary Shape to the Database

RISASection Files

You may create simple or complex sections in RISASection and then import those sections for use in your model.  Sections that exist in RISASection (files located in the "RISASection" file specified in Tools - Application Settings - File Locations) will be available for use in the model.  Each section must have a unique name for it to be available.

The shapes that are designated as General Material, Arbitrary Shape Type in RISASection will show up in the General tab under the "RISASection" Database/Manufacturer.

The shapes that are designated as Hot Rolled Steel Material in RISASection will show up in the Hot Rolled tab under the appropriate Shape Type (Channel, Wide Flange, etc.) when "RISASection" is selected as the Database/Manufacturer.

Note: Currently, RISASection can only import General and Hot Rolled Steel shapes. More material choices will be available in a future version.

Local axis nomenclature differs between RISASection and RISA-3D. The local y-axis is the same in both programs, but the x-axis in RISASection is the local z-axis in RISA-3D. Section properties are labeled accordingly, for example Ixx in RISASection will be Izz in RISA-3D. You can display local axes in the 3D view to verify the orientation, and modify using the Rotate property as needed.

For additional advice on this topic, please see the RISA Tips & Tricks webpage at risa.com/post/support. Type in Search keywords: RISASection Integration.

Troubleshooting RISASection / RISAFloor Interaction  

There are a few common issues that arise when attempting to access RISASection files from within RISAFloor.

There are some common mistakes that are made from within the RISASection program that may cause an issue when trying to read that shape from within RISAFloor.  

Structural Desktop (SDT) Shapes

The SDT database is provided by the Structural Desktop software in a file called SDT.FIL.  Structural Desktop automates drawing production of RISA models.  The SDT database is provided for shapes that are not directly supported in RISA models (such as bar joists) but are available in Structural Desktop. For more information on Structural Desktop see www.structuraldesktop.com.

On-Line Shapes

On-Line shapes are shapes whose dimensions are defined directly in the syntax of the shape name.  On-line shapes are not stored in the shape database because there is enough information from the label syntax to calculate all the shape properties.  A pipe, for example, can be fully defined by specifying the thickness and diameter.

These shapes are treated just like database shapes for stress calculations.  Currently, Pipes, Solid Rectangular and Solid Circular shapes are defined on-line as discussed below in Pipe Database Shapes, Solid Rectangular Shapes, and Solid Circular Shapes.

Pipe Database Shapes

Pipe shapes, which are hollow circular shapes, are entered as on-line shapes.  The syntax for these shapes is "PIdiaXthick", where "dia" is the pipe outside diameter and "thick" is the pipe thickness (in inches or centimeters).  For example (assuming US Standard units), PI10X.5 would be a 10" diameter pipe with a wall thickness of 1/2".

Solid Rectangular Shapes

These shapes can be defined as on-line shapes.  The syntax is "REhtXbase", where "ht" is the rectangle height and "base" is the rectangle base (in inches or cm).  For example, RE10X4 would be a 10" deep, 4" width rectangular shape (assuming US Standard units).  These shapes can also be defined in the Shape Editor.  When defined in the Shape Editor the depth of the solid rectangular section must always be greater than or equal to the width.

Solid Circular Shapes

These shapes are defined as on-line shapes.  The syntax is "BARdia", where "dia" is the circle diameter.  For example (assuming metric units), BAR2 would be a circular bar with a diameter of 2 cm.

Database Files

The shape databases are stored in the database files (*.FIL). These files may only be edited through the program.  The path to these files is set in the File Locations tab of Application Settings, which is found in the Tools menu.

After adding a new shape in your model, you will be prompted with this Changes to Shape Database dialog. Click 'Yes' if you want to add the shape to your Shape Database to be available for all future models. Click 'No' if you do not want the new shape to be available for other models, this will not save the shape to your Shape Database.

You can also make edits to the geometric and section properties of the shapes in your Shape Database. If you modify geometric properties, you can also use the Re-Calc button for the program to automatically calculate the corresponding section properties.

After editing the geometric or section properties for a shape in your model, you will be prompted with this Changes to Shape Database dialog. Click 'Yes' if you want to add the shape modifications to your Shape Database to be available for all future models. Click 'No' if you do not want the changes to apply to other models, this will not save the changes in the Shape Database for other models.

Note