Piles

Access the graphical Results View Settings for piles by clicking the Results icon in the View Settings section of the View ribbon and selecting the Piles tab.

Click on image to enlarge it

Clicking the Display Pile Results slider (to make it turn blue) will display Pile Results in the model view.

You can specify that pile results are to be shown with labels, or using a color basis.

The Labeling drop-down list provides the choices you have as to what information will be displayed alongside each pile.

Choosing a Color Basis for pile results uses various colors to represent particular results, such as the unity check, stress levels, etc. The drop-down list provides the choices you have as to how the colors are to be assigned to each pile. You may color the piles by the code check or the stress magnitudes. The key that defines these colors is shown in the upper-right corner of the model view.

Clicking the Display Pile Cap Results slider (to make it turn blue) will display Pile Cap Results in the model view.

You can specify that pile cap results are to be shown with labels, or using a color basis similar to Piles as discussed above.

For additional advice on this topic, please see the RISA Tips & Tricks webpage at risa.com/post/support. Type in Search keywords: Graphics.