December 13, 2010

How to Use the Internal Force Summation Tool in RISA-3D to Design Reinforcement

When you have a plate model for a slab or wall in RISA-3D, the Internal Force Summation Tool (IFST) is a very useful analysis tool to get exactly the forces that you want to design for. To use the tool, you must:

  • Be looking at the model in a plan or elevation view (i.e. 2D View only).
  • Have selected ONLY the portion of the model that you want to sum the forces for (all other elements are Un-selected).

Let’s look at a slab example. Here we have an elevated slab that is supported on all edges, with a column that lands in the center of the slab. The slab is modeled with plate elements.


After we solve the model for that load, we can view our plate contours and use the selection tools to select a representative strip.


The representative strip would be a strip through our slab/wall that we want to get the forces for so we can then design reinforcement for this strip. To use the IFST, select the button on the left side of the screen. Clicking twice on our strip will create a plane that the program cuts through the model and will then display the forces from the cut at the bottom of the screen.


If you have a specific location where you want detailed information, simply make a third click at this location. A dialog will display summarizing the forces in this design cut. Here you will find the shear forces, axial forces and moments through a given cut, so you can then design reinforcement for that strip.


For more details on the use of this tool, see our help file within RISA-3D. You can access the help file on at any point in time by pressing F1 on your keyboard.

Tags: Loads Plates RISA-2D RISA-3D

You may also be interested in

Nov 8, 2018 | Tips & Tricks
Mat Slab Overturning and Sliding Safety Factors

RISAFoundation v11.0 includes two new tabs in the Safety Factors resul...
Read More

Aug 21, 2019 | Tips & Tricks
RISA-3D v18 Sneak Peek Videos

The new release of RISA-3D is right around the corner! Check out our t...
Read More

Jul 12, 2019 | Tips & Tricks
Implementing Realistic Behavior for T/C Members in RISA-3D

Tension or Compression (T/C) Only members are commonly used in steel b...
Read More

Jun 20, 2019 | Tips & Tricks
Understanding Wall Panel Forces with Rigid Diaphragms

Rigid diaphragms represent a plane of very high rigidity and distribut...
Read More